§ 172.325 Elevated temperature materials.
发布08-07
生效09-08
摘要总结AI 辅助解读
本条款规定美国境内运输高温材料（Elevated temperature materials）的散装包装标记要求。除熔融铝或熔融硫需分别标记“MOLTEN ALUMINUM”或“MOLTEN SULFUR”外，其他高温材料散装包装必须在相对两侧以黑/白色哥特字体在对比背景上标记“HOT”。若使用白底菱形展示识别编号，“HOT”可置于同一菱形上方角落，字高至少50mm。该规定直接影响危险品申报与包装合规性，建议核实包装标记是否符合尺寸及格式要求。
- (a) Except as provided in paragraph (b) of this section, a bulk packaging containing an elevated temperature material must be marked on two opposing sides with the word “HOT” in black or white Gothic lettering on a contrasting background. The marking must be displayed on the packaging itself or in black lettering on a plain white square-on-point configuration having the same outside dimensions as a placard. (See § 172.302(b) for size of markings on bulk packagings.)
- (b) Bulk packagings containing molten aluminum or molten sulfur must be marked “MOLTEN ALUMINUM” or “MOLTEN SULFUR”, respectively, in the same manner as prescribed in paragraph (a) of this section.
- (c) If the identification number is displayed on a white-square-on-point display configuration, as prescribed in § 172.336(b), the word “HOT” may be displayed in the upper corner of the same white-square-on-point display configuration. The word “HOT” must be in black letters having a height of at least 50 mm (2.0 inches). Except for size, these markings shall be as illustrated for an Elevated temperature material, liquid, n.o.s.:
ER29DE94.000
[Amdt. 172-125, 58 FR 3348, Jan. 8, 1993, as amended by Amdt. 172-139, 59 FR 67487, Dec. 29, 1994]