§ 107.502 General registration requirements.
发布08-07
生效09-08
摘要总结AI 辅助解读
本条款规定了美国 DOT 规格罐式车辆（Cargo Tank Motor Vehicles）制造、组装、认证、检验及维修的通用注册要求。任何从事上述活动的个人或实体必须向 FMCSA 危险品部门完成注册，否则不得开展相关业务。受雇于已注册公司的检验员或设计认证工程师视为已注册。注册申请需用英文提交，每个生产/维修设施将分配独立的注册号。该规定旨在确保危险品运输容器全生命周期的合规性与可追溯性。
- (a) Definitions: For purposes of this subpart—
- (1) Assembly means the performance of any of the following functions when the function does not involve welding on the cargo tank wall:
- (i) The mounting of one or more tanks or cargo tanks on a motor vehicle or to a motor vehicle suspension component;
- (ii) The installation of equipment or components necessary to meet the specification requirements prior to the certification of the cargo tank motor vehicle; or
- (iii) The installation of linings, coatings, or other materials to the inside of a cargo tank wall.
- (2) The terms Authorized Inspector, Cargo tank, Cargo tank motor vehicle, Design Certifying Engineer, Registered Inspector, and Person are defined in § 171.8 of this chapter.
- (3) The terms cargo tank wall and manufacturer are defined in § 178.320(a), and repair is defined in § 180.403 of this chapter.
- (b) No person may engage in the manufacture, assembly, certification, inspection or repair of a cargo tank or cargo tank motor vehicle manufactured under the terms of a DOT specification under subchapter C of this chapter or a special permit issued under this part unless the person is registered with the Department in accordance with the provisions of this subpart. A person employed as an inspector or design certifying engineer is considered to be registered if the person's employer is registered. The requirements of this paragraph (b) do not apply to a person engaged in the repair of a DOT specification cargo tank used in the transportation of hazardous materials in the United States in accordance with § 180.413(a)(1)(iii) of this chapter.
- (c) A person who performs functions which are subject to the provisions of this subpart may perform only those functions which have been identified to the Department in accordance with the procedures of this subpart.
- (d) Registration statements must be in English, contain all the information required by this subpart, and be submitted to: FMCSA Hazardous Materials Division—MC-SEH, West Building, 1200 New Jersey Avenue SE, Washington, DC 20590.
- (e) Upon determination that a registration statement contains all the information required by this subpart, the Department will send the registrant a letter confirming receipt of the registration application and assigning a registration number to that person. A separate registration number will be assigned for each cargo tank manufacturing, assembly, repair facility or other place of business identified by the registrant.
[Amdt. 107-20, 54 FR 25003, June 12, 1989; 55 FR 37047, Sept. 7, 1990, as amended by Amdt. 107-22, 55 FR 39978, Oct. 1, 1990; Amdt. 107-23, 56 FR 66157, Dec. 20, 1991; Amdt. 107-28, 58 FR 46873, Sept. 3, 1993; Amdt. 107-39, 61 FR 51337, Oct. 1, 1996; 67 FR 61011, Sept. 27, 2002; 68 FR 19273, Apr. 18, 2003; 72 FR 55683, Oct. 1, 2007; 82 FR 15832, Mar. 30, 2017; 87 FR 79765, Dec. 27, 2022]